Electric Fireplace ElectricSun TUX Antik Oak Free Standing Electric Fires, with Sound Effect, 3 Colour, with APP, L110xH102cm

Warning and safety information

Maintenance:
WARNING: Completely disconnect power before attempting any maintenance or cleaning, to reduce the risk of fire or electric shock. Maintenance should only be performed by a certified technician.
Cleaning Before cleaning any parts of the fireplace make sure to first turn off the controls and then unplug the unit from power 230V.
CAUTION: Wait until the unit has completely cooled before attempting any cleaning
Cleaning Glass Panel: Remove dust with clean dry cloth. Remove fingerprints and other marks from glass door by using a clean damp cloth. Do not use abrasive cleaners or spray liquids on glass door surfaces.
Metal and metal painted parts should be cleaned with clean damp cloth only. Do not use abrasive cleaners or spray liquids on these surfaces.
Important:
• Please read all instructions carefully before using this product.
• Make sure that the voltage rating label on the type plate corresponds to your main voltage. If not see your retailer and do not connect the appliance.
• Never use the appliance unsupervised when in use.
• If you have to leave even for a short moment please stop the appliance.
• Keep out of reach of children and do not allow them to operate this appliance
• Only use the appliance for domestic purposes and in the way indicated in these instructions.
• From time to time check the cord for damages. Never use the appliance if the cord or any part of the appliance shows any signs of damage.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Make sure the connection cord does not touch any hot surfaces.
• WARNING: In order to avoid overheating, do not cover the heater.
• Keep the appliance at least 15 cm (6inches) from walls and any other thing, to permit a good air circulation.
• Do not use the appliance outdoors
• Do not use if you have wet hands.
• Never use the appliance on or near hot surfaces.
• Never move the appliance by pulling the cord.
• Before cleaning the appliance, make sure it is unplugged from the power and that it is completely cooled.
• Do not clean the appliance with abrasive chemicals.
• Never use accessories that are not recommended or supplied by the manufacturer. It could cause danger to the user or damage to the appliance
• Never route the mains cable beneath carpet.
• Never use the heater to dry clothes or any other similar items.
• The heater must not be located immediately below a socket outlet.
• This heater must not be used with an extension lead.
• Do not use this heater with a programmer, timer or any other device that switches the heater on automatically if the heater is covered or positioned incorrectly to avoid risk of fire
• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
• Children being supervised not to play with the appliance.
• CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
• WARNING: This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
• WARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.
• NOTE: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Manufacturer and Responsible Person information
ElectricSun, email: office[at]electricsun.de